PARAMOUNT BED A5 Series, Инструкция по эксплуатации

Страница: 11 / 40

10
■
When performing the height adjustment, pay attention not to hit the wall or beam.
●
The bed or wall may be damaged or deformed. Make
sure that the bed does not hit the wall or beam during
the height adjustment.
■
When setting up the bed, make sure that there is at least 20 cm clearance from the wall.
●
The main frame moves back and forth during the
height adjustment and could hit the wall, causing
damage or deformation of the bed.
■
Do not get on the mattress base when it is raised.
●
It applies excessive force to the support of the
mattress base, causing damage or deformation.
■
Check around the bed before operating the bed.
●
The bed operations may damage objects located around the bed, or may cause the bed to be
damaged or deformed.
Secure at least 20 cm clearance from the wall.
■
Make sure that the board stoppers are properly locked.
●
If the board stoppers are not locked properly,
the board may suddenly disengage when a staff
pushes (pulls) the board to move the bed or a
patient grabs the board to support their body,
resulting in injury due to the patient losing balance
and falling down.
■
Do not hold the side-rails to move the bed.
●
It applies excessive force to the side-rails, causing damage or deformation.
SAFETY PRECAUTIONS 2
Headboard
(Footboard)
Tighten
(Lock)
Loosen
(Unlock)
Board stopper