www.paramondo.de
45
Anschluss und Inbetriebnahme • Connection and start-up • Aansluiting en inbedrijfstelling • Conexión y puesta en servicio • Connexion et
mise en service • Collegamento e messa in funzione • Podłączenie i uruchomienie • Elektrik bağlantısının yapılması ve işletime alınması
You can additionally mount to your awning other Jarolift® hand and wall transmitters. You can program them by means of the copy function
as follows:
Copying the radio code
1. Press simultaneously the UP and DOWN button on the already
programmed transmitter. Press then 8 times the STOP button on this
transmitter. The motor will vibrate for confirmation.
2. Press now within 5 seconds the button UP and DOWN simulta
-
neously and then briefly the STOP button on the new transmitter
where you want to copy the code. The motor will vibrate for confir
-
mation. The code will now be copied on the new transmitter.
Deleting the radio code
1. Press simultaneously the UP and DOWN button on the transmitter.
Press then 6 times the STOP button.
2. Press then within 10 seconds the UP button. The motor will confirm
the deletion of the code through a short vibration
Changing the direction of the rotation
Press simultaneously the UP and DOWN button on the transmitter.
Press then the STOP button 6 times.
Press then within 10 seconds the UP button. The motor will confirm
the deletion of the code through a short vibration.
ATTENTION! When you change the direction of the ro
-
tation the transmitter will be removed from the motor.
Please program it again as described above.
Simultaneously press
the Up / Down button
(motor vibrates)
Then press 8 times
the STOP button
Transmitter 1
1
8
Transmitter 2
Simultaneously press
the Up / Down button
Then press the Stop
button
(motor vibrates)
1
1
Simultaneously
press the Up / Down
button
Then press 6 times
the Stop button
(motor vibrates)
Press the Up
button
1
6
1
Simultaneously press
the Up / Down button
Then press 6 times
the Stop button
Press Up
button
(motor vibrates)
1
6
1
