User Manual -
Typhoon Open –
12/2013 edition
.
PARAMINA SA
– Byway Evaggelistrias str. 19300 Aspropirgos, Greece, Tel: 0030 210 5575860-1
Fax: 0030 210 5575868, email:
- website:
www.paramina-compressors.com
15
In order to adjust the belts, screw the bolt (1) so as to adjust the spring until the belt reaches proper
tension as per drawing in page 14.
Oil change
Change the oil after the first 20 operating hours and then every 500 hours.
Always check the oil level through the oil sight glass (1) before every start of the compressor. The
level should always be at the top of the sight glass (leaving a small air bubble at the top of the
glass). While the compressor is operating the level should be between the minimum and the
maximum of the sight glass (red mark).
Oil change procedure:
Disconnect the pipe (2) and empty the oil vessel. After emptying the oil re-connect the pipe at the same
position. Pour new oil
(2,2 lit.)
inside the compressor block through the yellow plug (3) till the upper part of
the oil sight glass (1). Screw the plug (3) at the same position again.
Now you are ready to restart the compressor.
3
2
1
1
1
