User Manual -
Mistral M6&M8 -
04-2018 from s.n.1882761 edition
.
PARAMINA SA
– Byway Evaggelistrias str. 19300 Aspropirgos, Greece, Tel: 0030 210 5575860
Fax: 0030 210 5575868, email:
- website:
www.paramina-compressors.com
5
3.
User Instructions
Safety Measures - Warning Signs
HOT SURFACES
Do not touch.
Risk of burns if you touch
cylinders, aftercoolers, cylinder
heads
DANGER
This sign is placed whenever
there is danger of damage
caused to the unit or its
components
HIGH VOLTAGE
Risk of electric shock.
Maintenance work to be carried
out
only
by a trained electrician
DIRECTION OF ROTATION
Make sure for the proper
direction of rotation
USER INSTRUCTIONS
Users must read and fully
comprehend operation
instructions for using and
maintaining the compressor
This sign refers to
timely user instructions for
operating and maintaining
the compressor
AUTOMATIC OPERATION
Caution, the unit may start its
operation without any prior
notice. Before any work, turn
off mains supply
OBLIGATORY
During control and operation
of this unit you must wear
earplugs
RISK of rotating parts
TECHNICAL REQUIREMENTS
the operator must take into
account
Basic safety recommendations
The compressor is manufactured following current EU safety regulations.
The compressor is intended
ONLY
for compressing atmospheric air with a content of oxygen (21±1)%. Use of
any other gas type is not allowed. The manufacturer is not liable for damages caused by using the unit any other
way than the intended.
Use the compressor after making sure it is in perfect working condition. Any malfunction or failure must be
repaired immediately. Strictly follow the operation and maintenance instructions described in this manual.
Read carefully the instructions in this manual and follow them. Make sure users of the compressor are familiar
with the user instructions of the unit and its proper operation. Make sure they are authorized, trained and
trustworthy individuals. Make sure you are aware of and implement the current legal and all other regulations
pertaining to avoiding accidents and protecting the environment.
During first start or after maintenance, check motor’s direction of rotation (electric motor version). There is an
arrow indicating proper rotation. If the direction is reversed, interchange two of the three phase leads in the
mains (3 phase motors).
Never
change leads at the
motor
terminal board.
Before starting any work pertaining to maintenance of the compressor, turn off the supply from the mains and
press the Emergency Stop.
Only an authorized trained electrician may do electrical works.
