Parallel Audio Perfomer-100 Series, Руководство по эксплуатации

Страница: 7 / 8

OPERATION MANUAL V1.0 PAGE 7
Unbalanced Output: ¼” PHONE PLUG connector provides unbalanced audio output signal from this jack to the mixer/
amplifier. Use an audio output cable with ¼” PHONE PLUG connectors. Connect one end from the unbalanced output
jack of the receiver, and the other end to the “LINE IN” jack of the mixer/ amplifier.
Receiver Installation
For best operation, the receiver should be at least 1m above the ground and 1m away
from a wall or metal surface to minimise reflections. The transmitter should also be
at least 1m away from a wall or metal surface to minimise reflections. The transmitter
should also be at least 1m away from the receiver. Keep antennas away from noise
source such as motors, automobiles, neon light and large metal objects.
Rack Mounting
The receiver can be cabinet-mounted by either one or two units. If only one receiver is to be mounted, an optional kit is
available and it’s installed as shown in Fig 1. If two receivers are to be mounted, they can be assembled by another kit and
installed as shown in Fig 2.