Technical Data
2-Ch Receiver
dimensions:
68x55x25 mm
input power:
9-12V~(AC)
12-15V= (DC)
@ 60mA max.
contact rating:
250VAC / 5A
allowed temp.:
0°C .... 40°C
RF frequency:
433 MHz
4-Ch Transmitter
features:
4-buttons
activity LED
dimensions:
30x58x12 mm
RF-frequency:
433MHz
< 10mW ERP
(as req. CE /
R&TTE )
battery:
Type 27A
(12V Alkaline)
Disposal after end of using life for this product
Batteries and electronic devices of all kinds must not be disposed
thru regular household waste disposal but should be turned in to a
collection point for proper recycling. Please check with your local
requirements.
Limited Warranty
This product was designed and manufactured with great care and comes with a
warranty against material or manufacturing defects at time of purchase. This
warranty is valid for 24 months starting with the day of purchase and can be claimed
with original sales receipt. The warraty of TowiTek is limited to cost free repairing or
replacement of the defective unit. Expenses and risk of transportation; compensation
for installation and de-installation and all other expenses which may be related to the
repair or exchange of this product are not refunded by TowiTek. The liability for
consequential damages resulting from the use of this product – no matter of which
exact kind – is generally ruled out.
TowiTek 433MHz
radio receiver set
Nr. 19 12 40
User Guide
www.conrad.com
Thank you for purchasing this product of TowiTek!
This user guide contains many important instructions on
safe and proper use of this product. The purpose of this
user guide is to make sure you always will get best
performance andan reliable operation of your new product.
PLEASE FULLY READ THIS USER GUIDE!
The handling of products operating with electric current requires you to
follow the rules from VDE such as VDE 0100, VDE0550/0551, VDE 0700,
VDE 0711 and VDE 0860 or other local rules in your country.
•
TowiTek modules are not designed and authorized for use in life support
or life saving applications! Do not use the product for applications in
which a temporary or permanent failure or malfunction could cause
damage to persons or propery.
•
If the module is used to switch currents greater 24V it is necessary to
have the installation done with no voltage applied and performed by a
trained professional authorized for such work. The module may only be
used in such application if it was installed in a safe to touch enclosure.
•
The module must only be used in dry and clean environment. The use
near water, heavy dirt and/or high humidity is dangerous and not
permitted.
•
The product must not be used in conjunction with any type of flammable
liquid or gas or other environment with risk of spark triggered
explosions.
•
Never exceed the limits or ratings listed in the 'Technical Data' section at
the end of this user guide.
•
If the module is used in schools or educational facilities or similar
institutions the operation must be supervised by trained and authorized
staff.
•
The product itself and all parts thereof (including packing material) are
not suitable toys for childern! (choking hazard, risk of electric shock, ...)
Intended use for this product
The TowiTek 2-Ch radio receiver set is intended for use in wide range of
remote switching and controlling functions. Possible applications include
garage door, gates, lighting and many others. The output switch contacts
are suitable to handle mains voltage.
Features of the 2-Ch receiver
•
2-Ch receiver with two separate relay outputs
•
one handheld transmitter included with the set
•
up to 50 transmitter codes can be learned
•
toggle or time mode can be individually configured for each of the two
channels
•
built in antenna – range up to 50m with direct line of sight and no
interference with other RF-noise
•
supply voltage 12-15V DC or 9-12V AC (@ 60mA)
•
simple programming and configuration with single button
Features of the handheld transmitter
•
compact size dimensions of just 58 x 30 x 12 mm
•
4 buttons with tactile feedback
•
blue LED for showing transmitting activity
•
battery 12V Typ '27A' (included, already preinstalled)
•
48-bit security code
•
compliant with CE and R&TTE requirements (433MHz, <10mW ERP)
for use within EU countries
