Parallel Audio Perfomer-100 Series, Руководство по эксплуатации, Страница: 4 / 8

PAGE 4 OPERATION MANUAL V1.0
Channel Setting
1. Press and release SET button until the CHANNEL | FREQUENCY page appears.
2. Press
p
(UP) or
q
(DOWN) button to change the channel number. The corresponding frequency will change
accordingly. 5 seconds after selecting a channel, it will be automatically saved.
For an interference- free operation, a cleaner channel might be necessary if the current one receives too much
interference. To select a new channel:
Align infrared areas of the receiver and transmitter within 10~30cm.
Channel Synchronising of the Receiver and Transmitter
CHANNEL:001
FREQ:650.000MHz
CHANNEL:010
FREQ:652.250MHz
Volume Adjusting
The setting can be made right on the homepage.
After the setting is made, wait 5 seconds to store the setting.
CH:001
VOL:15
CH:001
VOL:10