Parallax Javelin Stamp, Руководство пользователя

Страница: 26 / 26

1: Introduction
Javelin Stamp Manual v1.1 • www.javelinstamp.com • Page 9
•
A COM port that can be used to connect the Javelin Stamp to other computers.
Alternately, you can attach a null modem adaptor to this COM port and then connect
the Javelin to peripherals such as serial GPS units, mice, etc.
•
Linear voltage regulator for prototype circuits.
•
Small breadboard area for building, testing and prototyping circuits.
•
A power header (supplied by the liner voltage regulator). This header can be used to
supply circuits with power.
•
A Javelin I/O header to connect your Javelin Stamp I/O pins to your circuit.
•
COM Port I/O header. You can use jumper wires to connect Javelin Stamp I/O pins
to the COM port I/O header. Then you can write code to communicate with another
serial device such as a computer or peripheral that’s connected to the COM port.
•
LED power indicator (labeled PWR).
•
Reset pushbutton. Press and release to restart the program from its beginning.
•
A servo port for connecting and controlling servo motors.
As mentioned earlier, the circuit examples in this manual feature parts you can find in the
Javelin Stamp Starter Kit. The parts are listed in Table 1.2. Table 1.3 lists parts that are also
recommended but not included in the kit.
Table 1.2: Javelin Stamp Starter Kit
Quantity Part Number Part Description
1 550-00019 Javelin Stamp Demo Board Rev A
1 JS1-IC Javelin Stamp Module Rev B
1 27957 Javelin Stamp Manual
1 800-00003 Serial Cable
1 800-00002 DB9 Null Modem Adapter Male to Male
1 604-00002 DS1620 Digital Thermometer
1 350-00009 Photoresistor
1 900-00001 Piezo Speaker
1 602-00009 74HC595 Output Shift Register
1 602-00010 74HC165 Input Shift Regster
3 400-00002 Tact Switch (Pushbutton)
2 350-00006 LED - Red - T1 3/4
8 350-00001 LED - Green - T 3/4
1 150-02210 RED - 220 - ¼ W - 5%
8 150-04710 RES - 470 - ¼ W - 5%
1 150-01020 RES - 1 k - ¼ W - 5%
3 150-01030 RES - 10 k - ¼ W - 5%
2 150-02230 RES - 22 k - ¼ W - 5%
sdill
Comment [4]: Make sure to add these examples.
sdill
Comment [5]: Verify Current Rev
sdill
Comment [6]:
Verify Current Rev