Step #3: Foam Tape
Item
Qty
Description
14
(4)
foam tape
•
Cut four pieces of foam tape, each 2 inches long.
•
Apply foam tape to the Gripper plate as shown in
Fig #7
.
This completes the left-side Gripper sub-assembly.
Fig #6
Fig #7
Step #4: Second Gripper Sub-assembly
Item
Qty
Description
4
(2)
Gripper link
5
(2)
#4 x 1" spacer
6
(1)
Gripper plate
7
(2)
4-40 x 1.25" pan head screw
8
(2)
4-40 hex nut
14
(4)
foam tape
•
Repeat
Steps #1
through
#3
to build the right-side
Gripper sub-assembly in a similar fashion.
•
Be sure the angled portions of the links match with the
Grippers face to face. Position the pieces exactly as
they appear in
Fig #8
.
•
Double check your work, then proceed to
Step #5
.
Fig #8
Copyright © Parallax Inc.
Gripper Kit (#28202)
v4.0 9/16/2014 Page 3 of 13
Downloaded from
Downloaded from
Downloaded from