Step #1: Spacers
Item
Qty
Description
4
(2)
Gripper link
5
(2)
#4 x 1" spacer
•
The Gripper Links have an angled portion on top.
Insert spacers into the large plastic holes near the
lower side of the angled portion.
•
Use
Fig #2
as a guide to install the spacers. When
done, the pieces will appear as shown in
Fig #3
.
Fig #2
Fig #3
Step #2: Gripper Links
Item
Qty
Description
6
(1)
Gripper plate
7
(2)
4-40 x 1.25" pan head screw
8
(2)
4-40 Hex Nut
•
Match the angled portions on top of the plastic links to
the angles on top of the Gripper as shown in
Fig #5.
•
Move links and spacers into the Gripper plate, then
secure with 4-40 screws and nuts as shown in
Fig #4.
•
Tighten securely.
•
Before continuing, double check your work to ensure
that the pieces are angled as in
Fig #5
.
Fig #4
Fig #5
Copyright © Parallax Inc.
Gripper Kit (#28202)
v4.0 9/16/2014 Page 2 of 13
Downloaded from
Downloaded from