Parajet MAVERICK, Руководство пользователя

Страница: 9 / 21

17 16
Pilots Manual for Parajet Maverick Lite Trike - © 2022 Parajet International Ltd Pilots Manual for Parajet Maverick Lite Trike - © 2022 Parajet International Ltd
TAKE-OFF WEIGHT
OFFSET FITMENT GUIDE
WARNING:
The following take-off weight offset fitment guide is for an initial reference point only. We strongly recommend
that these be tested before your first flight by hanging in a simulator with the aid of a qualified paramotor trike instructor.
Additional fine-tuning maybe required during your first few flights to ensure optimum control and comfort.
Moster 185
Atom 80
50kg -60kg
50kg - 55kg
Moster 185
Atom 80
60kg - 70kg
55kg - 60kg
Moster 185
Atom 80
70kg - 75kg
60kg - 65kg
Moster 185
Atom 80
75kg - 80kg
65kg - 70kg
Moster 185
Atom 80
80kg - 90kg
70kg - 75kg
Moster 185
Atom 80
90kg - 100kg
75kg - 80kg
Moster 185
Atom 80
100kg - 110kg
80kg - 85kg
SHORT
< 29 in /
< 73 cm
STANDARD
30 - 32 in /
76 - 81 cm
TALL
> 34 in /
> 86 cm
SETUP & ADJUSTMENT
PARACORD FITMENT GUIDE
The paracord suspension system stabilises the trike chassis
when in a seated position during flight. Correct fitment has
considerable effect on weight shift maneuverability, comfort and
safety of operation.
The paracord suspension system has three variable adjustment
settings based on your height: Standard, Short and Tall.
STANDARD Suitable for pilots with an inside leg length of 30 to
32 inches or 76 to 81 centimeters.
SHORT Suitable for pilots with an inside leg length of less than
29 inches or 73 centimeters.
TALL Suitable for pilots with an inside leg length greater than 34
inches or 86 centimeters.
INSIDE LEG MEASUREMENT Place one end of a measuring
tape on the inside of your leg as near to the crotch area as you
can. Ask someone to use the other end of the tape to take a
measurement on or just below your ankle joint, ensuring that the
tape isn’t too loose or taut. It’s not recommended to measure your
own inside leg. Since you would have to bend over to measure,
the result would be inaccurate.
PARACORD FITMENT Ensure the paracord runs freely
through the brace arm pulleys and underneath the main chassis
tube. Using the provided mallions, attach the paracord to the
O-rings on the front of harness using the correct setting for your
leg length. Ensure paracord attachment setting is symmetrical on
both sides of the harness.