(800) 471-8769
14
Copyright 2021 © Paragon Tank Truck Equipment
Complete prior to blower operation
Truck #_________________________
Transmission#___________________
P.T.O.#_________________________
P.T.O. Ratio _____________________
Read and understand Installation Manual.
The following have been verified before installing the PTO:
PTO model # matches packaged model #.
PTO mounting flange is correct for desired P657 mounting location.
PTO ratio has been verified.
PTO torque capabilities are acceptable for blower operation.
PTO rotation is correct for desired P657 orientation.
PTO is mounted per manufacturer’s recommendation.
Transmission has been filled to the proper oil level as required by the manufacturer.
The Blower can be rotated by hand without lobes touching or clashing.
Drive shaft is installed correctly.
Provided drive shaft flange set screws have been installed with “Loctite® 243” or equivalent.
Air Inlet is installed as far away from heat sources as possible.
All bolt torques have been verified.
All supplied warning labels have been installed.
The correct Relief Valve has been installed properly.
Melt Plug is installed on the discharge side of the blower.
Sight glasses and magnetic drain plug can be seen to identify oil level in P657 oil tanks after
installation.
Breathers are installed in the proper location.
P657 front and rear oil tanks are filled to the proper levels (1/2 to 7/8 full).
Blower model # P657 Blower
Blower serial # __________________
Date__________________________
Inspected by____________________
Safety Checklist
