(800) 471-8769
11
Copyright 2021 © Paragon Tank Truck Equipment
•
I
nspect blower mounting, drive shaft, P.T.O. and air filter for integrity.
• Remove camlock dust cap and connect the hot air hose.
• Follow trailer manufacturer’s recommendation regarding hose connections and proper valve operation.
• Slowly engage P.T.O. with engine at idle as per PTO manufacturer’s recommendations.
• Bring engine RPM up to operating speed and engage preprogrammed RPM.
• Unload trailer as per trailer manufacturer’s recommendation.
• While discharging, visually check blower for vibration, mechanical noise, or excessive heat.
• If blower relief valve or melt plug is activated, reduce the line pressure to 0 psi.
- Shut down the P657 by disengaging the PTO, shut off the engine, and check for blockages
• Disengage P.T.O. according to manufacturer’s instructions, shut off engine.
• Disconnect blower hose and replace camlock dust cap.
Caution
The blower and accessories will become hot enough to cause skin burns on contact.
Rotating machinery is dangerous.
Warning
Always wear ear protection when in close proximity to blower.
Warning
Blower Operation
