8
LT5674 (ISS 5)
SECTION FOUR Cleaning & Fuel Bed Laying (user instructions)
Warning: -Before you clean any part of the appliance ensure that the appliance is switched off and cold.
CLEANING: DECORATIVE TRIM
The Decorative finish of the trim is coated with a high temperature lacquer, it should be wiped with a soft,
clean, dry, cloth only.
The trim should be removed for cleaning. The fret should be removed before removing the trim, which is held
in place by four magnets.
CLEANING: BLACK PAINTED SURFACES
These surfaces should be dusted regularly and any marks removed with a soft cloth.
Abrasive or chemical cleaner should never be used.
CLEANING: GLASS PANEL
From time to time it may be necessary to clean the glass panel.
We recommend you use a Ceramic Hob Cleaner (brands such as HOB BRITE and VITRO CLEN have been found to be
acceptable) these are available from most leading Supermarkets.
Remove the glass panel as follows:
Remove ash pan cover and fret.
Remove decorative trim (held in place with four magnets).
Slacken but do not remove the 2 nuts securing the bottom glass frame.
Remove the 2 nuts located down each side.
While supporting the glass panel, remove the 2 nuts securing the top of the glass frame, slide the glass out
gently.
Lay the glass panel down on a flat working surface on top of an old opened newspaper with the side to be
cleaned uppermost take care not to erase the dot printing in the cleaning process.
Follow the Instructions on the Hob Cleaner Bottle.
On stubborn stains (where the appliance has been used for a long period without glass panel being cleaned), use a
new Brillo Pad well wetted with the Hob cleaner applied directly to it.
Ensure all the residues of the cleaner are removed with a damp cloth and the glass panel is completely dry before
fitting to the appliance.
Note: - If the fuel bed has not been placed correctly, causing the gas flame to contact the glass this may result in
glass staining that cannot be removed by cleaning.
Re-assemble in reverse order ensuring the seal is compressed evenly at the top and bottom
Re-fit the top outlet grill before re-fitting the trim and fret and before re-lighting.
