4
Inspection and maintenance for the
Paragon Pro
Manufacturing Solutions
material lift model 294
Daily or before each use:
• Inspect all warning and instructional decals. Replace if missing or not legible.
• Inspect entire machine for damage and for loose or missing fasteners. Repair or replace as
needed.
• Inspect pendant cord for damage and for correct operation when pressing control buttons.
Repair or replace as needed.
• Inspect and test-operate the safety catch on the wave bar. Repair or replace as needed.
Lubricate with light oil if needed.
• Inspect for any hydraulic system leaks or drips. Repair or replace components as needed.
• Inspect the cradle straps for damage. Replace if cut or worn.
• Inspect the casters for secure bolts through the stems and that the brakes work properly.
Repair or replace as needed.
• Inspect the lift chain for damage and for sticky or frozen links. Repair or replace as needed.
Lubricate or replace as needed.
At 6 month intervals:
• Inspect the electrical cables and wires for cracks or loose connections. Repair or replace as
needed before use.
• Check the fl uid level in the hydraulic pump for correct level.
• Inspect hydraulic hoses and fi ttings. Replace if cracked or damaged.
• Grease the crank mechanism on the cradle.
• Grease the caster bearings and adjust brakes as needed.
• Lay the frame on its handle side and remove side cover to inspect and service internal parts:
o Inspect and lubricate lift chains and rollers. Replace if worn or damaged.
o Inspect chain anchor bolts for security. Use only correct fasteners from the manufacturer.
o Inspect and lubricate the safety latch mechanism for proper functioning. Repair or replace
as needed.
o Inspect the plastic glide strips on the telescoping sections. Replace if missing.
For Parts, Service and Technical Questions Contact:
7251 S 42nd St.
Grand Forks, ND 58201
701-775-0551
800-448-0822
www.
paragonpromfg
.com
