16
1.
NSAA
S.W.P. N-1.10.1-20
STANDARD WORK PROCESS
DATE 2/06/2009
NEB FIELD SUPPORT - (812) 331-5603
Page 14 of 16
This work and the information it contains ( collectively referred to as ‘ W ork’ ) are the confidential property of the Otis E levator Company ( ‘ Otis’ ) . This W ork is delivered on the ex press condition
that: it will be used or reproduced by Otis employees ex clusively for, or on behalf of, Otis; it will not be disclosed, reproduced, or distributed by or to others, in whole or in part, without the
prior written consent of Otis: and, it and any copies will be promptly returned to Otis upon demand or upon termination of employment.
U npublished W ork-8 Copyright 2008, Otis E levator Company
W ith the cab walls assembled, the ceiling can be lowered to rest on the cab walls.
Open the emergency exi t and access the canopy from a ladder. U sing an alignment tool, insert
the tool through a hole in the canopy and into a hole in the back wall to secure the back wall
while installing the hardware in the canopy.
Safety note:
Always secure the emergancy exi t when accesing the car top.
Phillips screwdriver or alignment drift pin.
