Paragon Pro Doorminator 3070, Руководство оператора

Страница: 4 / 12

1 . First, get yourself a needle nose plier and then begin by aligning the caster as shown. You’ll
no�ce a metal ring in the upper part of the
caster
, this is where the
needle nose
will come in
play.
2 . With the needle nose ready, you want to start crimping the metal ring and applying
pressure for it to fit inside the hole.
3 . As shown in the above in image 3, make sure you don’t see any part of the metal ring
s�cking out. If you do, you’ll need to pull the caster out and realign the ring as it was
previously and repeat the steps.
4 . Finally, when you see that the metal ring is completely inside the hole, begin pushing the
rod of the caster all the way through un�l it is no loger visible.
1
CASTER INSTALATION
Helpful tips to get your casters in.
1 2 3 4