Paradyne SIM2000, Руководство по установке, Страница: 6 / 14

6
September 2004 SIM2-A2-GZ40-00
Single Line SDSL Connection
A single line connection can be established between a SIM2000-24 and any of
Paradyne’s SDSL subscriber units.
Bandwidth and Line Code
There are nine bandwidth options for SIM2000-24 SDSL connections. Distance
capabilities vary, dependent upon the type of line code being utilized. The defaults
are TC/PAM line encoding (G.SHDSL) at 272 kbps. See
SIM2000-24 Parameters
on page 9 for more detailed information regarding bandwidth and line code.
Default Settings
No configuration is necessary for the SIM2000-24 to operate at default settings.
SIM2000-24 Management
Once the SIM2000-24 has been installed, line code, bandwidth and all other
configurations are software selectable. Dependent upon the MUM model installed
in your DSLAM, the SIM2000-24 can be configured via the Command Line
Interface (CLI), Simple Network Management Protocol (SNMP), or the web-based
Network Management System (NMS). For further information regarding
SIM2000-24 management and configuration please refer to the NMS, CLI, and
SNMP User’s Guides.
Table 2. SIM2000-24 Default Settings
Configuration Option Default
Backbone-VLAN 0 (off)
Circ. ID (Circuit Indentification) n/a (no default)
Flood Upl (Uplink)
IP Range 1 0.0.0.0 – 255.255.255.255
IP Range 2 0.0.0.0 – 0.0.0.0
Line Code TC/PAM (G.SHDSL)
Pri (VLAN Priority) 0 (none)
Protocol All
Speed: 272 kbps
VLAN Ranges (1–10) 0 – 0 (off)