Paradyne SIM2000 Скачать руководство пользователя страница 2

2

 September 

2004

SIM2-A2-GZ40-00

Software and Firmware License Agreement

The terms and conditions of this License Agreement (the “Agreement”) will apply 
to the software and/or firmware (individually or collectively the “Software”) 
incorporated into the Paradyne product (the “Product”) purchased by you and any 
derivatives obtained from the Software, including any copy of either. If you have 
executed a separate written agreement covering the Software supplied to you 
under this purchase, such separate written agreement shall govern.

Paradyne Corporation (“Paradyne”) grants to you, and you (“Licensee”) agree to 
accept a personal, non-transferable, non-exclusive, right (without the right to 
sublicense) to use the Software, solely as it is intended and solely as incorporated 
in the Product purchased from Paradyne or its authorized distributor or reseller 
under the following terms and conditions:

1. Ownership: The Software is the sole property of Paradyne and/or its licensors. 

The Licensee acquires no title, right or interest in the Software other than the 
license granted under this Agreement.

2. Licensee shall not use the Software in any country other than the country in 

which the Product was rightfully purchased except upon prior written notice to 
Paradyne and an agreement in writing to additional terms.

3. The Licensee shall not reverse engineer, decompile or disassemble the 

Software in whole or in part.

4. The Licensee shall not copy the Software except for a single archival copy.

5. Except for the Product warranty contained in the manual, the Software is 

provided “AS IS” and in its present state and condition and Paradyne makes 
no other warranty whatsoever with respect to the Product purchased by you. 
THIS AGREEMENT EXPRESSLY EXCLUDES ALL OTHER WARRANTIES, 
WHETHER EXPRESS OR IMPLIED, OR ORAL OR WRITTEN, INCLUDING 
WITHOUT LIMITATION:

a.

Any warranty that the Software is error-free, will operate uninterrupted in 
your operating environment, or is compatible with any equipment or 
software configurations; and

b.

ANY AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT 
LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS 
FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.

Some states or other jurisdictions do not allow the exclusion of implied 
warranties on limitations on how long an implied warranty lasts, so the above 
limitations may not apply to you. This warranty gives you specific legal rights, 

ONCE YOU HAVE READ THIS LICENSE AGREEMENT AND AGREE TO ITS
TERMS, YOU MAY USE THE SOFTWARE AND/OR FIRMWARE INCORPORATED
INTO THE PARADYNE PRODUCT. BY USING THE PARADYNE PRODUCT YOU
SHOW YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE AGREEMENT.

IN THE EVENT THAT YOU DO NOT AGREE WITH ANY OF THE TERMS OF THIS
LICENSE AGREEMENT, PROMPTLY RETURN THE UNUSED PRODUCT IN ITS
ORIGINAL PACKAGING AND YOUR SALES RECEIPT OR INVOICE TO THE
LOCATION WHERE YOU OBTAINED THE PARADYNE PRODUCT OR THE
LOCATION FROM WHICH IT WAS SHIPPED TO YOU, AS APPLICABLE, AND YOU
WILL RECEIVE A REFUND OR CREDIT FOR THE PARADYNE PRODUCT
PURCHASED BY YOU.

Содержание SIM2000















Отзывы: