3
8000-A2-GN11-10
June 1997
-
After the MCC card is installed, there are configuration instructions that must
be performed before you can begin to use the MCC card for network
management. Refer to the
HotWire Digital Subscriber Line Access
Multiplexer (DSLAM) User’s Guide, Document No. 8000-A2-GB20, for more
information.
Cables You Need
The following cables and connectors are used with this product:
H
An 8-pin modular CAT5 (UTP5) unshielded twisted-pair cable for connection
from the HotWire DSLAM Management MCC port to a 10BaseT hub
connector (connected to an SNMP management system network).
H
A serial cable (provided with this product) for connection from the HotWire
DSLAM SERIAL port to a terminal, computer, or modem. In addition, you will
also need a:
— NULL modem adapter (customer provided) and a DB25 adapter and
cable (provided with this product) when connecting to a modem, or
— DB25 adapter (provided with this product) when connecting to a terminal
or computer for local network management. If your terminal or computer
has a 9-pin serial port, you may need a (female) DB9 to (male) DB25
adapter.
If you are connecting to . . .
Use an 8-pin modular . . .
Local terminal console
DB25 adapter and cable.
SNMP network management system via a
10BaseT hub connector
Straight-through cable.
Modem for remote management
DB25 adapter, cable, and NULL
MODEM adapter.
Refer to
Pin Assignments on page 8 for pinouts.
