Paradyne COMSPHERE 3911, Инструкция по установке и эксплуатации

Страница: 171 / 280

Dial Access Security
12-9 3910-A2-GN32-40 September 1998
Set Answer Sec
Set Answer Security determines if dial access security is enabled or disabled. This method of
inbound security is configured in the answering modem. Although this also appears under the
Security Configuration Option group, it can only be changed from the Set Answer Sec LCD
display in the Security branch.
To access Set Answer Sec from Set Access Ctrl, make the following selections:
F1
Set Access Ctrl
Set_Answer_Sec
F2 F3
Press the key until Set_Answer_Sec appears.
Select Set_Answer_Sec.
Table 12-2 describes the settings of the Set Answer Security group option.
Table 12-2
Set Answer Security Group Options
Set Answer Sec
No_Answ_Sec DTE_Only VF_&_DTE
Set Answer Security. Is the primary method for enabling or disabling the dial access security function.
H
No Answer Security
Disables the dial access security feature.
H
DTE Only
The answering modem is enabled for security. The originating user must supply a password when
prompted.
NOTE: A call attempt never enters data mode if the answering modem is configured for DTE_Only and the
originating caller attempts to enter a password using only the VF-side password entry technique.
NOTE: In modem pooling applications where modems are connected to a multiline hunt group (rotary), all
modems must have this configuration option set to the same value.
H
VF & DTE
The answering modem is enabled for security. The modems negotiate security using the VF-side
password entry technique protocol. If successful, and the Password Type for this particular VF
password is set for VF_&_DTE, a password is requested from the originating user. If successful, the
modems connect and can pass data.
NOTE: A call attempt fails if the answering modem is configured for VF_&_DTE and the originating caller
does not first enter a VF-side password.