2
Model 3810Plus Installation
DTE Connection
Use the following procedure to connect the RS-232D cable from the modem to the
DTE:
1. Make sure the modem’s rear panel power switch is Off.
2. Connect the DB-25-P (male) connector on the cable to the DB-25-S (female)
connector labeled DTE 1 on the modem’s rear panel. Use a small screwdriver to
fasten the cable to the modem.
3. Connect the DB-25-P connector on the cable to the DB-25-S connector on the
DTE. Use a small screwdriver to fasten the cable to the DTE.
98-14677-03
DATA
TERMINAL
EQUIPMENT
DB-25-P
CONNECTOR
SUB-MINIATURE
4-POSITION
PLUG FOR
NETWORK
MANAGEMENT
SYSTEM
OPERATION
POWER
SUPPLY
DIAL NETWORK
6-POSITION PLUG
LEASED-LINE
NETWORK
8-POSITION
PLUG
OFF
DIAL
LEASED
DTE 1
NMS
PWR
ON
HUBBING
DEVICE
3810Plus Rear Panel
