Paradyne BitStorm 4800 Express, Руководство по установке

Страница: 43 / 68

4821-A2-GN20-00 April 2002
4-1
4
Configuration
Overview
The BitStorm 4800 is designed to require minimal configuration before it can be
accessed by a Network Operations Center (NOC). You may need to configure:
„
The IP address for the Management Module if the default address
(10.10.10.10) is not usable
„
The default gateway address
„
The data rate for the V.35/X.21 port, if used
„
The serial interface type for the V.35/X.21 port if you use an EIA-530-A or X.21
uplink
Initial configuration can be performed using the Command Line Interface (CLI).
The CLI is available from a terminal or PC connected to the CONSOLE port of the
Management Module.
See the BitStorm 4800 User’s Guide for detailed information about the CLI.
Conventions Used
In this book, the Enter key means whatever key you use to submit data to your
terminal or PC. It may be called the Return key on older devices.
Characters displayed on your screen, including those you type, are shown in the
Courier
font in this book.