Paradyne ACCULINK 336x E1 Скачать руководство пользователя

Страница: 81 / 168

Maintenance

4-23

3360-A2-GB20-20

December 1996

Monitoring Test Patterns

Use the Monitor command to monitor 32767, QRSS, or

511 test patterns.

This command provides the number of errors detected

in the test pattern (5 digits, maximum 99999).

To monitor a 32767, QRSS, or 511 test pattern,

1. From the top-level menu screen, select Test.

2. From the Test screen, select Ptrns.

Test:
Rlpbk Lpbk

Ptrns

3. From the Patterns screen, select Mon.

Patterns:
Abort

Send

Mon

4. From the Patterns Mon screen, press F1 for 32767,

F2 for QRSS, or F3 for 511.

Patterns: Mon
32767 QRSS

511

If you monitor a 32767 pattern, skip Step 5.

5. From the Monitor screen, press the Function key

that corresponds to the port for which you want to
monitor a QRSS or 511 test pattern. Use the scroll
keys, if necessary.

Monitor:

Name

Prt1

Prt2

Prt3

The Monitor screen appears with the error count.
If the maximum of 99999 is exceeded, OvrFlw
appears instead of the count. If the receiver loses
synchronization while the monitor is active, No
Sync appears.

Aborting Test Patterns

Use the Abort command to stop all test patterns or any

selected test pattern active on the E1 NTU.

To abort test patterns,

1. From the top-level menu screen, select Test.

2. From the Test screen, select Ptrns.

Test:
Rlpbk Lpbk

Ptrns

3. From the Patterns screen, select Abort.

Patterns:
Abort

Send

Mon

Содержание ACCULINK 336x E1









































































































































































Результаты поиска

Содержание ACCULINK 336x E1

Отзывы:

Похожие инструкции для ACCULINK 336x E1

Бренды по названию

Популярные бренды

Paradyne ACCULINK 336x E1, Руководство оператора

Результаты поиска

Содержание ACCULINK 336x E1

Отзывы:

Похожие инструкции для ACCULINK 336x E1

Бренды по названию

Популярные бренды