![background image](http://html1.mh-extra.com/html/paradyne/9161-single-t1/9161-single-t1_reference-manual_3616239207.webp)
MIB Descriptions
B-26
9161-A2-GH30-20
September 1997
Object
Setting/Contents
Description
rs232PortInSpeed
(rs232PortEntry 5 )
Contains the port’s input
speed in bits per second.
Speed of the synchronous data port
is determined by the channel
configuration. This object is
supported as read-only and cannot
be changed.
Speeds available for the COM port:
9600, 14,400, 19,200, 28,800,
38,400, 57,600, and 115,200.
rs232PortOut
Speed
(rs232PortEntry 6 )
Contains the port’s output
speed in bits per second.
Speed of the synchronous data port
is determined by the channel
configuration and cannot be changed
through this object.
Speeds available for the COM port:
9600, 14,400, 19,200, 28,800,
38,400, 57,600 and 115,200.
rs232PortInFlow
Type
(rs232PortEntry 7 )
Contains the port’s type of
input flow control.
Supports the following values:
none(1) – No flow control.
ctsRts(2) – Indicates that CTS is
being used for flow control. Also
indicates that both CTS and DTR
are being used for flow control.
dsrDtr(3) – Only DTR is being
used for flow control.
NOTE:
The above settings are
mutually exclusive.
There is no way to set
the value “Both”, to
ignore both control
leads. If “Both” is the
current setting in the
unit, the value returned
for this object is
ctsRts(2).
rs232PortOutFlow
Type
(rs232PortEntry 8 )
Contains the port’s type of
output flow control.
none(1) – No flow control.