8
7520-A2-GN10-10
December 1998
Accessing and Displaying Configuration Options
To display the configuration options, you must first copy one configuration option
set into the edit area.
Procedure
To load a configuration option set into the configuration edit area:
1. Follow this menu selection sequence:
Main Menu
→
Configuration (Load Configuration From)
2. Select Current Configuration or Default Factory Configuration. Press Enter.
The selected configuration option set is loaded and the Configuration
Edit/Display menu screen appears.
Configuration
Edit/Display
•
System
• Network
• Data Port
• Terminal Port
MAIN MENU
Status
Test
Configuration
Control
497-15239
Load
Configuration
From ...
System Options Menu
For System Options, refer to Table 1. To access the System Options screen,
follow this menu selection sequence:
Main Menu
→
Configuration (Load Configuration From)
→
Configuration Edit/Display
→
System
Table 1.
System Options (1 of 2)
Operating Mode
Possible Settings: DDS, LADS
Default Setting: DDS
Determines the unit’s operating mode. The choice depends on the DSU’s application.
DDS – Standard DDS network operation.
LADS – The Local Area Data Set operating mode requires that the local and remote
units are connected directly to each other. This is a point-to-point application; also
known as LDM.