Paradyne 7520, Руководство пользователя, Страница: 48 / 76

Messages and Troubleshooting
6-2
7520-A2-GB20-20 May 1998
Table 6-1. Device Messages (2 of 2)
Device Message What To Do What Message Indicates
Invalid Test
Combination A loopback or 511 pattern
test was in progress when
Start was selected to start
another test, or was active
on the same or another
interface when Start was
selected. Wait until other test ends and
message clears.
Abort all tests from the Test
menu screen.
Stop the test from the same
screen the test was started
from.
Please Wait Command takes longer
than 5 seconds. Wait until message clears.
Test Active A test is running and no
higher priority health and
status messages exist. Contact service provider if test
initiated by the network.
Wait until the other test ends
and message clears.
Cancel all tests from the Test
screen.
Stop the test from the same
screen the test was started
from.