manualshive.com logo in svg

Paradyne 7520, Руководство пользователя, Страница: 42 / 76

Поделиться
Скачать
Paradyne 7520 Скачать руководство пользователя страница 42

Testing

 5-6

7520-A2-GB20-20

May 1998

511 Test Pattern for the Network

This test sends or monitors the 511 test pattern over the network interface.

Procedure

To run a Send 511 test:

1. Position the cursor at the Start command next to Send 511 on the Network

Tests screen.

2. Press Enter.

3. The Start command is changed to Stop. If you want to manually stop the test,

verify that the cursor is positioned at the Stop command.

4. Press Enter. The duration of the test is displayed.

Procedure

To run a Monitor 511 test:

1. Position the cursor at the Start command next to Monitor 511 on the Network

Tests screen.

2. If desired, use Ctrl-a to switch to the screen function key area and use the

virtual function key r or R (ResetMon) to clear the error counter to zero. Press
Ctrl-a to return the cursor to the Start command.

3. Press Enter.

4. The Start command is changed to Stop. If you want to manually stop the test,

verify that the cursor is positioned at the Stop command.

5. Press Enter. The duration of the test is displayed.

Refer to 

Running Network Tests

 on page  5-3 for an example of the Network

Tests screen.

Содержание 7520













































































Отзывы:

Нет отзывов