Paradyne 7510 Скачать руководство пользователя

Страница: 22 / 70

Customizing the DSU

3-3

7510-A2-GB20-00

March 1997

Configuring the DSU

Configuration option settings determine how the DSU operates. Use the DSU’s
Configuration branch to display or change configuration option settings.

Configuration Option Areas

The DSU is shipped with factory settings in the Default Factory configuration
area. You can find default information by:

Referring to

Configuration Option Tables

, Appendix A, or

Worksheets

Appendix B.

Accessing the Configuration branch of the DSU menu.

The DSU has two sets of configuration option settings. The Current Configuration
matches the Default Factory Configuration until modified and saved by the user.

Configuration Option Area

Configuration Option Set

Current Configuration

The DSU’s active set of configuration options.

Default Factory Configuration

A read-only configuration area containing the factory
default configuration options.

If the factory default settings do not support your network’s configuration,
customize the configuration options for your application.

Accessing and Displaying Configuration Options

To display the configuration options, you must first copy one configuration option
set into the edit area.

Procedure

To load a configuration option set into the configuration edit area:

1. Follow this menu selection sequence:

Main Menu

→

Configuration (Load Configuration From)

2. Select Current Configuration or Default Factory Configuration. Press Return.

The selected configuration option set is loaded and the Configuration
Edit/Display menu screen appears.

See

Appendix A

for a list and explanation of the configuration options available.

Содержание 7510

































































Результаты поиска

Содержание 7510

Отзывы:

Похожие инструкции для 7510

Бренды по названию

Популярные бренды

Paradyne 7510, Руководство пользователя

Результаты поиска

Содержание 7510

Отзывы:

Похожие инструкции для 7510

Бренды по названию

Популярные бренды