5920-A2-GZ40-00
May 2005
5
Installation into a Rack with Threaded Screw Holes
Procedure
To install a chassis in a rack with threaded screw holes:
1. Install the mounting brackets appropriate for your rack.
1. Determine where the chassis will be placed in the rack.
2. Line up the chassis mounting brackets with the front rail holes.
3. Holding the chassis in place, loosely install the bottom screws first and then
the top screws.
4. Tighten all screws firmly with a Phillips screwdriver.
Repeat the process for each POTS/ISDN splitter chassis. POTS/ISDN splitter
chassis can be mounted directly on top of each other.
Installing POTS/ISDN Splitter Cards in the Chassis
Procedure
If POTS/ISDN splitter cards are not installed in the chassis:
1. From the front of the chassis, slide a card into a free slot, taking care to keep
the edges of the card in the grooves in the inner walls of the chassis.
2. Using a medium Phillips screwdriver, fasten the card in place with its captive
screws.
3. Repeat for all the cards you have to install.
