background image

10

 May 

2005

5920-A2-GZ40-00

Warranty, Sales, Service, and Training Information

Contact your local sales representative, service representative, or distributor 
directly for any help needed. For additional information concerning warranty, sales, 
service, repair, installation, documentation, training, distributor locations, or 
Paradyne worldwide office locations, use one of the following methods:

„

Internet:

 

 Visit the Paradyne World Wide Web site at 

www.paradyne.com

(Be sure to register your warranty at 

www.paradyne.com/warranty

.)

„

Telephone:

 

 Call our automated system to receive current information by fax 

or to speak with a company representative.

— Within the U.S.A., call 1-800-870-2221

— Outside the U.S.A., call 1-727-530-2340

Document Feedback

We welcome your comments and suggestions about this document. Please mail 
them to Technical Publications, Paradyne Corporation, 8545 126th Ave. N., Largo, 
FL 33773, or send e-mail to 

[email protected]

. Include the number and 

title of this document in your correspondence. Please include your name and 
phone number if you are willing to provide additional clarification.

Trademarks

Paradyne and the Paradyne logo are registered trademarks of Paradyne 
Corporation. All other products and services mentioned herein are the trademarks, 
service marks, registered trademarks, or registered service marks of their 
respective owners.

*5920-A2-GZ40-00*

*5920-A2-GZ40-00*

Copyright 2005 Paradyne Corporation. Printed in U.S.A.

Содержание 5920











Отзывы: