Paradyne 3162, Быстрая справка

Страница: 19 / 23

17
Table 15. Management and Communication – SNMP Traps
Configuration Options
Option Factory 1 Factory 2 Comments/Description
SNMP Traps:
Enable Enable Specifies whether SNMP traps are
sent over the SNMP management
SNMP Traps:
Disable Disable
p p
sent over the SNMP management
link.
Number of Trap
1 1
The number of trap managers Number of Trap
Managers:
2–6 2–6
The number of trap managers
supported by the device.
NMS n IP Address:
[Text Field] [Text Field]
Specifies the IP address for each
trap manager. This configuration
NMS n IP Address:
Clear Clear
trap manager. This configuration
option is repeated for all
n
managers.
None None
Com Com
Destination:
Aux Aux
Specifies the network destination
for Trap Manager
n.
FDL FDL
for Trap Manager n.
EDL n EDL n
Disable Disable
General Traps:
Warm Warm Specifies the general trap types to
enable: WarmStart Authentication
General Traps:
AuthFail AuthFail
p g p yp
enable: WarmStart, Authentication
Failure or both.
Both Both
Failure or both.
Enterprise Specific
Enable Enable
Specifies whether the
enterpriseSpecific traps are
Enterprise Specific
Traps:
Disable Disable
p
enterpriseSpecific traps are
enabled.
Disable Disable
Link Traps:
Up Up Specifies the link trap type to
Enable: Trap on Link Up Link
Link Traps:
Down Down
p p yp
Enable: Trap on Link Up, Link
Down, or both.
Both Both
Down, or both.
Network Network
DTE DTE
When any link trap types are
Link Trap Interfaces:
T1s T1s
When any link trap types are
Enabled, specifies which links to
send traps for
Link Trap Interfaces:
Ports Ports
, p
send traps for.
All All