background image

INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE

Read instruction manual before use. Operation of this device without understanding
the manual and receiving proper training is a misuse of this equipment. A person who
has not read and understood all operating and safety instructions, is not qualified to
operate the CROSSFIRE portable/deck gun.

This instruction manual is intended to familiarize firefighters and maintenance personnel with the operation, servicing, and
safety procedures associated with the CROSSFIRE portable/deck gun.

This manual should be kept available to all operating and maintenance personnel.

DANGER

CROSSFIRE

MANUAL:
WITH STOW-A-WAY 800 BASE

TFTX

-

XXXXXX

TFTX

-

X
XXXXX

SERIAL

#:

SERIAL

#:

MODEL

#

:
X
FT

-NJ

MODEL

#:

XFT

-

NJ

©Copyright Task Force Tips, Inc. 1999-2011

LIX-040 September 13, 2011 Rev05

TASK FORCE TIPS, Inc.

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 • 219-462-6161 • Fax 219-464-7155

MADE IN USA •www.tft.com

The member companies of FEMSA that provide emergency response
equipment and services want responders to know and understand the
following:

1. Firefighting and Emergency Response are inherently dangerous

activities requiring proper training in their hazards and the use of extreme
caution at all times.

2. It is your responsibility to read and understand any user's instructions,

including purpose and limitations, provided with any piece of equipment
you may be called upon to use.

3. It is your responsibility to know that you have been properly trained in

Firefighting and /or Emergency Response and in the use, precautions,
and care of any equipment you may be called upon to use.

4. It is your responsibility to be in proper physical condition and to maintain

the personal skill level required to operate any equipment you may be
called upon to use.

5. It is your responsibility to know that your equipment is in operable

condition and has been maintained in accordance with the
manufacturer’s instructions.

6. Failure to follow these guidelines may result in death, burns or other

severe injury.

DANGER

PERSONAL RESPONSIBILITY CODE

Fire and Emergency Manufacturers and Services Association, Inc.

P.O. Box 147, Lynnfield, MA 01940 • www.FEMSA.org

FEMSA

Maximum recommended flow:

1250 GPM (5000 L/min)

on truck mount adaptor,

800 GPM (3000 L/min)

on portable base.

Maximum recommended

inlet pressure is 175 psi (12 bar).

TASK FORCE TIPS

®

FIRE FIGHTING EQUIPMENT

®

Содержание CROSSFIRE

















Отзывы: