1752 and 1754 SHDSL Router User’s Guide
Following table shows the definition of each field.
Field
Description
Valid
Created successfully
Policy Name
Name of the policy
First SA Name
Name of 1st security association
Protocol
Each SA supports a single security protocol - AH or ESP. If
you want to use both protocols simultaneously, you need to
create a bundle of one or more SA pairs.
Mode
The SA mode - tunnel or transport:
• in tunnel mode you must also specify the source and
destination addresses (either IPv4 or IPv6) of the security
gateways that form the IPsec peers. You can also optionally
configure how IPsec deals with fragmentation and reassembly
of packets.
• in transport mode, the IPsec policy referenced in the
command provides the necessary source and destination
address information.
Direction
the direction of traffic that the SA will apply to
SPI
a unique identifier called the Security Parameter Index
SA Name
Name of security association
Click on
View,
and the IPSec SA Port Configuration page is invoked as follows.
1752-A2-GB20-00 June 2005
77
