background image

Spectra Keypads 35

Minimizing Fire Hazards

The three most common causes of fires:
• Cooking is the leading cause of home fires in the U.S. It's

also the leading cause of fire injuries. Cooking fires often
result from unattended cooking and human error, rather
than mechanical failure of stoves or ovens. 

• Careless smoking is the leading cause of fire deaths.

Smoke detectors and smolder-resistant bedding and
upholstered furniture are significant fire deterrents. 

• Heating is the second leading cause of residential fires.

However, heating fires are a larger problem in single family
homes than in apartments since the heating systems in
single family homes are often not professionally
maintained.

Fire Safety Tips 

• In the event of a fire, remember time is the biggest enemy

and every second counts! Escape first, then call for help.
Develop a home fire escape plan and designate a meeting
place outside. Make sure everyone in the family knows two
ways to escape from every room. Practice feeling your
way out with your eyes closed. Never stand up in a fire,
always crawl low under the smoke and try to keep your
mouth covered. Never return to a burning building for any
reason; it may cost you your life.

• Finally, having at least one working smoke alarm

dramatically increases your chances of surviving a fire.
And remember to practice a home escape plan frequently
with your family.

http://www.ealarm.com.my

Содержание Spectra 1689
















































Отзывы: