background image

IMPORTANT INFORMATION

Limitation of liability

It is mandatory, 

Matri

x

2000

 panel to be installed in accordance with this manual, applicable codes, 

and the instructions of the Authority Having Jurisdiction. The manufacturer shall not under any cir-

cumstances be liable for any incidental or consequential damages arising from loss of property or 

other damages or losses owing to the failure of products beyond the cost of repair or replacement 

of any defective products. The manufacturer reserves the right to make product improvements and 

change product specifications at any time.

The manufacturer assumes no responsibility for errors or omissions, while every precaution has 

been taken during the preparation of this manual to ensure the accuracy of its contents.

Warranty

PARADOX FIRE warrants its products to be free from defects in materials and workmanship under 

normal use for a period of two (2) years (the “Warranty Period”) from the production-delivery date, 

identified by date code(s) indicated on the products. Because PARADOX FIRE does not install or 

connect the products and because the products may be used in conjunction with products not man-

ufactured by PARADOX FIRE, PARADOX FIRE cannot guarantee the performance of the fire alarm 

system and shall not be responsible in any way whatsoever for faulty installation or connection.

RoHS directive compliance

The EC RoHS guideline has been released in order to reduce the heavy metal load in 

electrical and electronic products caused by e.g. lead and mercury. All manufacturers 

are obligated to provide only RoHS-compliant products to the European market, effective 

from July 1st, 2006.
PARADOX  FIRE  hereby  states  that 

Matri

x

2000 

panel  is  fully  compliant  with  RoHS 

2002/95/EC directive.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the prod-

uct is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the mu-

nicipal waste stream via designated collection facilities appointed by the government or 

the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative conse-

quences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact 

your city office, waste disposal service or the shop where you purchased the product.

Содержание Matrix2000













Отзывы: