HD77 Programming
4
HD77 Installation Guide
19
HD77 Programming
4
All PIR parameters of the HD77 can be configured by the installer using the TM50 touchpad, the K641 plus
keypad, and by using BabyWare software. Server parameters must be programmed through BabyWare, only.
Note:
To program the module sections from any keypad BabyWare must be disconnected from the system.
Note:
ALWAYS DO A READ before programming.
4.1 PIR programming Through BabyWare
1. In BabyWare under the Security Modules double click the
HD77
modules or right click the
HD77
module
and Click
Properties
. The HD77 Programming screen appears.
Note:
Due to our constant efforts to improve our products the software screen grabs may not be exactly the
same as your screen.
Figure 15 – BabyWare Main Screen
Note:
This may take up to 1 minute.
2. Wait for the properties to appear.
3. Use VOD to verify Camera vision / image / angle.
In BabyWare => HD77 Properties => Video tab => play button