Configure IP Router
3
HD77 Installation Guide
13
Configure IP Router
3
With the IP150 and Cameras wired to the router, perform the port forwarding and reserve the IP addresses of
the IP150 and the HD77cameras.
Determine if this job site has a network administrator. See if he is able to assist you in this part of the
installation.
Note:
This procedure is dependent upon the individual router and network security for the end user’s system.
The end user’s router may require a different procedure.
The following provides an example for one type of router. Refer to the router manufacturer's documentation for
detailed instructions. If the end user does not have his router documentation you can find the correct
instructions on the internet.
3.1 Setting Up the Router for Port Forwarding
Following is an
example
of instructions for port forwarding.
Note:
The end users specific router may require different instructions.
EXAMPLE:
1. Ensure that the router is connected properly as indicated in the router’s instructions.
2. Access your router’s configuration page:
Step 1.
Refer to your router’s manual for the exact procedure. In most cases, this is done by entering
the router’s IP address in the address bar of your web browser. Your router’s IP address may be
indicated in the router’s instructions or on a sticker on the router.
Step 2.
If you cannot find the IP address of the router, try the following from your Windows Screen:
Step a.
Open a command prompt window. Press the windows button on your keyboard.
In the search programs and files window type in Command.
Step b. Select Command Prompt.
Step c.
At the prompt Type
ipconfig
Step d. Press Enter.
The router IP address will be the
Default Gateway
. . . . .:
xx.xx.xx.xxx
