background image

DigiplexNE Grafica Keypad Module 11

n

4.0 SYSTEM OPTIONS

The following sections detail the options that can be programmed for
Grafica.

4.1 PARTITION ASSIGNMENT

S

ECTION

 [001]: O

PTIONS

 [1] 

TO

 [8]

Each keypad in the system can be assigned to one or more
partitions. In section

 [001]

, options 

[1] 

to

 [8]

 represent partitions 1

through 8 respectively. To assign the keypad to a partition, enable the
option that corresponds to the desired partition. 

By default, partitions

1 to 8 are enabled. 

4.2 DISPLAY CODE ENTRY

S

ECTION

 [002]: O

PTION

 [1]

This option displays the digits of the User Access Codes on the
graphic LCD as they are entered. 

Option 

[1]

 OFF = Digits are replaced by a 

*

. (Default).

Option 

[1]

 ON = Access Code digits will be displayed.

4.3 DISPLAY EXIT DELAY

S

ECTION

 [002]: O

PTION

 [2]

Based on the user's needs, an Exit Delay Timer can be programmed
to provide the user time to exit the partition before the system is
armed. If this option is enabled, the Exit Delay Timer's countdown will
appear on the graphic LCD screen next to the hour-glass icon.

Option 

[2]

 OFF = Exit delay time will not appear.

Option 

[2] 

ON = Exit delay time will appear (Default).

Содержание Grafica DNE-K07

























Отзывы: