10 Reference & Installation Manual
The serial number is located on Grafica’s PCB or enter
section
[0000]
in Step 3 to view Grafica’s version and serial
number.
3.2 PROGRAMMING METHODS
The following methods can be used when programming the Grafica
keypad:
3.2.1 F
EATURE
S
ELECT
P
ROGRAMMING
You can program sections by enabling or disabling options.
Within these sections, keys
[1]
to
[8]
or scroll keys represent a
specific Grafica option. Use the scroll keys to highlight the
desired option and press the corresponding action key to
enable or disable the option. An “
X
” will appear to indicate that
the option is enabled. Press the appropriate action key to save
the status of selected option(s).
3.2.2 D
ECIMAL
P
ROGRAMMING
Some sections require the entry of a decimal value. For this
method, any value from 000 to 255 can be entered.
3.2.3 H
EXADECIMAL
P
ROGRAMMING
Some sections require the entry of a hexadecimal values
[A]
to
[F]
. Press the “#” key to scroll through these values. If the
value is left unchanged for a second or two, Grafica will
automatically select it, and move forward to the next digit.
Содержание Grafica DNE-K07
Страница 1: ...for DNE K07 Reference and Installation Manual...
Страница 2: ......
Страница 23: ......
Страница 24: ...Printed in Canada 08 2002 GRAFICA EI01...