background image

"

ARM ONLY

"

CODE:

This code can only be used to arm the system. No other system fea-

tures can be accessed, and the system cannot be disarmed using the

"Arm Only" code, unless it is used during the exit delay period.

Deleting a user code:

Pressing the 

[2

ND

]

key + 

[

ENTER

]

, while in programming mode at any

user code address,  will delete that user code.

ARMING THE SYSTEM

The user-friendly Esprit 727 can be armed in 5 different ways

designed to cover a wide variety of security situations. We suggest

that you familiarize yourself with all 5 arming procedures so that you

can take full advantage of your control panel.

(1) 

REGULAR system arming 

(used for normal, day-to-day system operation)

The keypad’s green "

READY

"

light must be "on" in order to arm the

system. This light will only illuminate if all protected zones are closed.

All doors and windows must be closed, and there can be no move-

ment in areas monitored by motion detectors. Once the "

READY

"

light

is on, enter your user code. (The installer will program all user codes

and code priorities for you.) If you make a mistake entering your

code, the keypad sounders “

END

/

REJECTION

” beep will let you know.

Just press 

[

CLEAR

]

and re-enter the code. When you have correctly

entered your user code, the red "

ARMED

"

light will come on, and you

will hear the keypad "

CONFIRMATION

" beep. The "

READY

" light will flash

during the exit delay period. Your installer will program exit delay

duration based on the time you require to safely exit the protected

area once the system is armed.

Important:

Please note that when entering user codes, the 

[10]

key

represents the digit “0”.

(2) “STAY” arming

[

STAY

MASTER CODE

OR

USER CODES

1, 2, 3

(partial system arming)

"

STAY

" arming allows you to remain in the protected area while "par-

tially" arming the system. This means that you can stay in and move

around your home or commercial building, while certain designated

zones are armed and still receive the protection of your security sys-

tem. You might choose to have entry/exit points like doors or windows

protected, or the basement, or perhaps all the zones on the perimeter

of your home or establishment. Based on your instructions, your

installer programs the control panel to bypass these zones in "stay

arming" mode. These programmed "stay" zones can only be changed

during zone definition programming. (Please remember that 

fire zone

7 and keypad zone 8 cannot be bypassed

.) Entering 

[

STAY

MAS

-

TER CODE

or [

STAY

+

USER CODE

1

(

2

OR

3

) on the keypad activates the

"stay arming" command. "

STAY

" arming can also be activated by a key

switch - please refer to section on "key switch/push button arming".

(3) FAST arming

K

EY

[10] 

(One touch system arming - no code required)

Fast arming (

regular

mode). When the "

READY

" light is on, pressing

key

[10] 

steadily for 2 seconds will automatically arm the system. No

user code is required. This feature can be used to enable specified

individuals like service personnel (i.e. cleaners, maintenance) to arm

the system when leaving the protected area, without giving them

access to any other control panel operations. ("

FAST ARMING

" must be

activated by your installer during "panel option" programming.)

Fast arming (

stay

mode). When activated, no "

READY

" light is required

to arm the system. Pressing key 

[10] 

for 2 seconds automatically

"

STAY

" arms the system. (See "

STAY

" arming features described

5

4

UM727

UM727

Содержание Esprit 727










Отзывы: