Paradox Esprit 640, Руководство по установке

Страница: 8 / 13

The “on” or “off” status of keys [1] , [2] and/or [3] determines
which keypad options are enabled, according to the definitions
found in the following table:
Address 32, key [1]
KEYPAD ZONE CONNECTION
A “ single ” keypad zone
( key [1] “off” )
can be configured for N.C.
and/or N.O. contacts using 1 zone resistor. (see page 20, “sin-
gle keypad zone” connection diagram)
Activation of “ATZ” keypad zone doubling
(key [1] “on”)
reduces
wiring and installation requirements by permitting connection of
two distinct zones per input (loop), on the same pair of wires.
Each zone can be reported separately, using different resistor
values. The first keypad zone (regular zone) is identified by a
1K W resistor, and the second keypad zone (doubled zone) is
identified by a 2.2K W resistor. (See page 21, “2 Keypad zones”
connection diagram.)
Address 32, key [2]
KEYPAD ZONE DISPLAY
This key’s function is only applicable when key [1] is “off” (ATZ
zone doubling is disabled. )
Key Feature Key light OFF Key light ON
[1]
ATZ keypad zone doubling Disabled Enabled
[2]
Keypad zone shown on Kpd 1 Kpd 2
keypad as Kpd1/Kpd2***
[3]
Keypad zone supervision Disabled Enabled
[4]
Keypad Clock mode Refreshed by panel Stand alone
[5]
View Event List mode Versions prior Versions 2.XX
to 2.00
IM640
12
*** When “zone doubling” is disabled, you can select which
zone will be displayed as the keypad zone by the panel. For
keypad zone assignment, refer to the table bellow. Activate or
deactivate key [2] according to which of the two possible key-
pad zones should be reported and displayed as the keypad
zone for the particular panel model being used.
Panel software versions prior to 2.00
Panel software versions 2.XX
Address 32, key [3]
KEYPAD ZONE SUPERVISION
Key = “on”: Available only on “Series 8” control panels with
software versions 1.4 onward. Enable “keypad zone supervision”
on control panel (address 210 , key [11] “on” for keypad zone 1,
key [12] “on” for keypad zone 2) for each keypad zone to be super-
vised. Refer to the panel installation manual for further instructions.
Esprit panel model Kpd 1
Key [2] “off”
Kpd 2
Key [2] “on”
728 Express 5 6
728
5
(no ATZ)
;
9
(with ATZ)
6
(no ATZ)
;
10
(with ATZ)
738 Express 7 8
738
7
(no ATZ)
;
13
(with ATZ)
8
(no ATZ)
;
14
(with ATZ)
Esprit panel model Kpd 1
Key [2] “off”
Kpd 2
Key [2] “on”
718 7 8
728 7 8
728L 7 8
738 13 19
748 13 19
748ES 13 19
IM640
13