IM639
23
the system to view event list mode. The display will indicate:
Event/Event number/Day/Time ex:
ALARM
01A
(1st line)
/ 001
Sun 12:52
(2nd line).
Pressing
[+]
starts from the current to the oldest event and
pressing
[-]
starts from the current to the most recent event.
Autoscrolling is started by pressing
[+]
or
[-]
for 2 seconds. You
have an adjustable delay (1 to 4 seconds) between each events
in autoscrolling (same as the scrolling delay, address
036
).
When you reach the end of the event buffer, a beep is heard.
Autoscrolling is turned off by pressing again on
[+]
or
[-].
If an
unlisted event occurs or there are no more events in the event
list, a fail beep is heard and
not listed
is displayed on the LCD.
Important: If timer loss message appears in the display, the time
and day indicated may not be accurate. If the time was repro-
grammed following power loss, all messages displayed
before
timer restore message contain the correct time and day.
IM639
22
All manuals and user guides at all-guides.com
