10 Reference & Installation Manual
the keypad will emit an intermittent beep whenever a trouble condition
from the Trouble Groups occurs in the system. The intermittent beep
will remain activated until the user enters the Trouble Display
or if the
trouble is resolved (see your control panel’s
Reference & Installation
Manual
for details concerning Trouble Display). The intermittent beep
will reinitialize whenever the trouble reoccurs.
System Troubles / Clock Loss
Option
[1]
OFF = Disabled (default).
Option
[1]
ON = Enabled.
Communicator Troubles
Option
[2]
OFF = Disabled (default).
Option
[2]
ON = Enabled.
Module / Communication Bus Troubles
Option
[3]
OFF = Disabled (default).
Option
[3]
ON = Enabled.
Zone Troubles
Option
[4]
OFF = Disabled (default).
Option
[4]
ON = Enabled.
4.11 Keypad Anti-tamper Enable
Section
[011]
Option
[5]
When the tamper option is enabled and the keypad's anti-tamper
switch is triggered, the keypad will send a tamper report to the control
panel via the communication bus. For information on how the control
panel will process the tamper, refer to the tamper recognition options
in your
control panel’s
Reference and Installation manual
.
Option
[5]
OFF = Keypad's anti-tamper is disabled (default).
Option
[5]
ON = Keypad's anti-tamper is enabled.
DGP2648_EI06.fm Page 10 Thursday, July 22, 2004 9:15 AM
