6 Reference & Installation Manual
4.1 Partition Display
Section
[001]
to
[008]
You can program the LED keypad to display up to four partitions.
Sections
[001]
to
[008]
correspond to partitions 1 to 8. The LED
numbers A1 to A4 are assigned values 001 to 004 (see section 3). To
assign a display number to a partition, choose a section number from
[001]
to
[008]
and assign it a value between 001 and 004 which
represents LED numbers A1 to A4 respectively.
Figure 3: LED Partition Display
Do not assign the same display number to more than one
section. For example, you cannot assign value 002 to
sections
[003]
and
[004]
. The rejection beep will remind you
that a selected display number is already assigned to another
section. Refer to section 6.0 on page 14 for default values.
Example
:
LED A3 is assigned to partition 3. To reassign LED A3 to partition 8
perform the following steps:
1) Enter
[003]
to select partition 3.
2) Enter
[000]
to clear the value.
Value: 001 002 003 004
DGP2648_EI06.fm Page 6 Thursday, July 22, 2004 9:15 AM
