12 Installation Manual
FACE LIGHT INTENSITY
Section [102] - Default: [4]
The Face Light’s illumination can be adjusted
according to the installation’s requirements from 0
(extinguished) to 8 (brightest).
FACE LIGHT OPERATION
Section [103] - Default: [0]
The Face Light can be set to remain illuminated
continually or can follow the Status LEDs’ state.
If [0] in section [103] is selected, this will
override options [4] to [7] in Display on
Card Read (see page 9). In addition, if [1] in
section [103] is selected, this will override
[0] to [3] in Display on Card Read (see
page 9).
FACE LIGHT COLOUR
Section [104] - Default: [0]
The Face Light’s colour can be blue or green as
desired.
Enter
Description
[0] to [8] Face Light’s intensity level.
Enter Description
[0]
Face Light constant.
[1]
Face Light follows Status LEDs.
