Proximity Reader 3
jacket back 3.175cm (1.25in) and stripping the
wires back 0.635cm (0.25in). Splice the reader’s
wires with a recommended cable wire. Route the
cable to the controller and connect as shown in
Figure 1: Connection Drawing on page 5.
MOUNTING ON METAL SURFACES
Although the read range may slightly decrease, the
reader can be mounted on metal. However, do not
box in or surround the card reader with any kind of
metal. If the reader must be installed in a metal
enclosure, ensure that the face of the card reader is
not covered and that at least 1.6" (4cm) remain
between the card reader and the metal on all sides
of the card reader.
TECHNICAL SPECIFICATIONS
Input Voltage:
Typical: 13.8Vdc, min.: 11.0Vdc,
max: 14.5Vdc
Input Current:
Typical: 65mA @ 12.5Vdc, with
card: 105mA
Consumption:
Typical: 812mW @ 12.5Vdc, with
card 1.31mW
Frequency:
Exciter Field: 125KHz Pulse
Modulated, receive low:
12.500KHz, Receive high:
15.625KHz
Operating Temp:
-25°C (-13°F) to +65°C (+149°F)
Output formats:
Reader: 26- and 37-bit Wiegand
Keypad: 8-, 26- and 37-bit
Wiegand, 4-bit with or without
parity, and 4 bits buffered with or
without parity
Cable Distance:
152.4m (500ft.)
