10
User Guide
While in the zones overview screen the bottom right of the screen shows one of the
following labels meaning:
|NO FLTR|:
No Filter. All conditions may appear on the character spaces.
|ALARMS|:
Only alarm indications are displayed for each zone (character
|A|
,
|I|
,
|a|
and cross-zone indications (
|X034|
)).
|FAULTS|:
Only fault indications are displayed for each zone (characters
|Z|
,
|R|
and
|F|
).
|BYPASS|:
Only bypass indications are displayed for each zone (character
|z|
,
|r|
and
|b|
).
These filters may be activated by pressing the
<ALRM>
,
<FAULT>
and
[BYP]
buttons
while in the Zones overview screen.
3.3 Zone configuration (ALM1.3)
CCHE
________________
____________________
______________
Figure 7.
Zone configuration screen
Like the zones overview, this screen uses the same representation of one character
space for each installed zone. Each character space represents the configuration that
applies to the zone. The following character have the meaning:
|
|:
Normal zone.
|C|:
The zone belongs to a cross-zoning group (4 zones) and is one of the two detector
zones.
|E|:
Extinguish button.
|H|:
HOLD button input.
|i|:
The zone belongs to an Intellizone group.
3.4 Installed modules, Module Identification (ALM1.4)
M12345678
RL: _______
ZM: ______
KD: ___ ____
Figure 8.
Installed modules screen
This screen represents an overview of the installed modules (expansions) with each
LCD character representing one module. The top LCD line forms an index with the
module ID. The next 3 lines display the Relay expansion modules (
|RL|
), Zone modules
