Page 20 of 28
Part No. 100318 Rev. 1
Issued: 2021-06-08
10-B) Check tightness of the battery terminals. If the battery terminal nuts are not tight, turn
the nuts one at a time until hand tight and then 1/2 turn using a wrench.
Step 11 - Install Solar Panels on the Power Pack
(Optional)
11-A) To install the solar panels to the power pack, first locate the orientation of the solar panel
on the lid of the power pack as shown below. Mark the location of the solar panel black electrical
connection on the lid of the power pack (approx. 3 inches from edge of lid) and use a 7/8” drill bit
to drill a 7/8” hole in the lid. Insert the solar panel electrical wire into the power pack. Secure the
solar panel to the lid of the power pack using double-sided tape.
