panthera S3 Скачать руководство пользователя

Страница: 5 / 28

art.nr

.bruk-S3-eng, Rev

. 2016-02

Panthera

AB reserves the right to make technical changes if required

SAFETY REGULATIONS

Current information

Up-to-date information on safety and product updates can be found at Panthera’s:

website,

www.panthera.se

Verify that your wheelchair corresponds with your order:

- Measure the seat width.

- Measure the height of the backrest.

- Ensure you have received the accessories you ordered.

Conduct a technical inspection of your wheelchair, ensuring that:

- the rear wheel’s quick release can easily be shifted in and out of its casings.

- the rear wheel is firmly attached following installation.

- the quick release button springs out fully while in locked position.

- all four wheels are in contact with the floor.

- the Castor fork can be rotated with ease.

- the backrest folds down easily.

Balance and tipping capacity

The angle of the backrest, the adjustment of the backrest upholstery and the position of

the rear wheel are the most significant factors affecting the wheelchair’s balance and

tendency to tip. After adapting your wheelchair, check that you

feel confident about the

balance of the wheelchair.

The tipping capacity of the wheelchair may also be affected if a bag is hung on the back-

rest, if you lean or stretch backwards, if the tyres are worn or contain insufficient air or if

there is an unexpected change to the surface you are driving on.

WARNING

Panthera wheelchairs are designed to be as manoeuvrable as possible, which means the

wheelchair responds quickly and seamlessly to the actions you perform. If you perform the

wrong actions you could

tip over in the wheelchair

. If you operate the wheelchair incorrect-

ly and

do not have an anti-tip device,

there is a risk you may

tip backwards

The anti-tip devices

are a safety feature designed to

prevent you from falling backwards

in the wheelchair

. If you have the slightest doubt about the balance of the wheelchair, the

anti-tip devices should always be fully extended. If you operate or use the wheelchair in

such a manner that the anti-tip devices are used regularly, or if your model is equipped

with electrically powered wheels, the load on the devices will increase and they must be

checked daily.

Содержание S3





























Результаты поиска

Содержание S3

Отзывы:

Похожие инструкции для S3

Бренды по названию

Популярные бренды

panthera S3, Руководство по эксплуатации

Результаты поиска

Содержание S3

Отзывы:

Похожие инструкции для S3

Бренды по названию

Популярные бренды